UPS

Showing 31–60 of 173 resultsSorted by latest

  • Even Flat Spray Nozzle 8001EVS

    Even Flat Spray Nozzle 8001EVS

    $9.00
    This nozzle produces a very light spray. It is better suited for smaller application areas, or in a place where only a very light spray is needed.
    Add to cart
  • 1/4 Inch NPT Female Pipe to 1/4 Inch NPT Female Brass Pipe Fitting

    1/4 Inch NPT Female Pipe to 1/4 Inch NPT Female Brass Pipe Fitting

    $7.00
    • 90-degree elbow for connecting two pipes or fittings at an angle
    • Female National Pipe Taper (NPT) threads for connecting to male threaded pipes
    • Forge brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
    • Operating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F)
    Add to cart
  • Gold Hardcard ( 10 Pack )

    Gold Hardcard ( 10 Pack )

    $25.00     Add to cart
  • Platinum Hardcard ( 10 Pack )

    Platinum Hardcard ( 10 Pack )

    $20.50     Add to cart
  • Black Hardcard ( 10 Pack )

    Black Hardcard ( 10 Pack )

    $17.50     Add to cart
  • Olfa A1 Knife

    Olfa A1 Knife

    $4.73
    The longtime seller “A” has been fully remodeled and now called “A-1”. The Olfa A1 Yellow Knife features a full-length stainless steel blade channel with a micro click Auto-Lock blade slider that has 26 blade positions compared to 13 on other knives. Pocket-clip/blade snapper and carbon-like non-slip handle. This knife comes equipped with a high quality carbon tool steel blade which is produced using Olfa's precise multi-step production process for unparalleled sharpness and superior edge retention. Long lasting, durable snap-off blade a new sharp edge with each snap. For right- and left- handed use. Easy, tool-free blade change for convenience. Uses Olfa standard size, 9 mm, blades.
    Add to cart
  • Shrader Valve Kit

    Shrader Valve Kit

    $5.00
    This kit includes 5 new shrader valves and a shrader valve tool.
    Add to cart
  • Tri Edge X ( Orange )

    Tri Edge X ( Orange )

    $2.95
    The angles of the original Tri-Edge have been recalculated and extended into a bigger tool with the same durability and quality of the original Tri-Edge. The Tri Edge X gives you the ability to reach into deep gaskets and hard to reach spots with ease! Blue: First level, softest material. Yellow: Second level, stronger than the blue Orange: Third level, hardest material Pink: Rubberized, heat resistant, and best used on wet surfaces
    Add to cart
  • Tri Edge X ( Yellow )

    Tri Edge X ( Yellow )

    $2.95
    The angles of the original Tri-Edge have been recalculated and extended into a bigger tool with the same durability and quality of the original Tri-Edge. The Tri Edge X gives you the ability to reach into deep gaskets and hard to reach spots with ease! Blue: First level, softest material. Yellow: Second level, stronger than the blue Orange: Third level, hardest material Pink: Rubberized, heat resistant, and best used on wet surfaces
    Add to cart
  • Tri Edge X ( Pink )

    Tri Edge X ( Pink )

    $2.95
    The angles of the original Tri-Edge have been recalculated and extended into a bigger tool with the same durability and quality of the original Tri-Edge. The Tri Edge X gives you the ability to reach into deep gaskets and hard to reach spots with ease! Blue: First level, softest material. Yellow: Second level, stronger than the blue Orange: Third level, hardest material Pink: Rubberized, heat resistant, and best used on wet surfaces
    Add to cart
  • Tri Edge X (Blue)

    Tri Edge X (Blue)

    $2.95
    The angles of the original Tri-Edge have been recalculated and extended into a bigger tool with the same durability and quality of the original Tri-Edge. The Tri Edge X gives you the ability to reach into deep gaskets and hard to reach spots with ease! Blue: First level, softest material. Yellow: Second level, stronger than the blue Orange: Third level, hardest material Pink: Rubberized, heat resistant, and best used on wet surfaces
    Add to cart
  • NT-SS Snap blade

    NT-SS Snap blade

    $20.00
    Stainless steel snap blades from the makers of the "Red Dot" knife. Use in 9mm and multi-blade cartridge knives. Pack of 50.
    Add to cart
  • Shrader Valve ( 3 pack )

    Shrader Valve ( 3 pack )

    $2.00
    This set includes 3 new shrader valves.
    Add to cart
  • Yellow Quick Foot

    Yellow Quick Foot

    $4.60
    The Yellow Quick Foot will help you reach the hard to reach places that drive you crazy. Use the edge of the handle like a Chizler to  clean those problem decals off with ease. The Yellow Quick Foot is sure to make your installs easier.
    Add to cart
  • Squeegee Magic

    Squeegee Magic

    $20.00
    This slip tape can be applied to the edge of your hard cards and squeegees for the purpose of creating a no scratch slippery edge on your tool, while also providing some extra durability. Also works GREAT for a plotter cutting strip repair! 3/4 x 36yd.
    Add to cart
  • Reach Scrubber

    Reach Scrubber

    $18.00
    The Scrubber helps you clean those hard to reach places with ease. Long handle and replaceable white scrub pad. Uses standard 3M white scrub pads cut to fit.
    Add to cart
  • 5″ Orange Crush

    5″ Orange Crush

    $14.77
    The Orange Crush squeegee helps expel water from under the film while keeping its strength.
    Add to cart
  • 5″ Cropped Clear Crush Squeegee

    5″ Cropped Clear Crush Squeegee

    $15.40
    The Clear Crush is a squeegee blade designed for users that prefer the flexibility of a soft squeegee but the stiffness of harder squeegee. This blade is the best of both worlds. Soft enough to squeegee curved surfaces without having to apply too much pressure but stiff enough to push or pull solution away from the job at hand.
    Add to cart
  • 8″ Fusion Big Mouth Handle

    8″ Fusion Big Mouth Handle

    $33.48
    The 8” Fusion Big Mouth Handle features brass inlaid screw threads and stainless steel screws. This handle is designed to hold a 3/8” thick squeegee. One of the biggest issues installers encounter when installing thick mil films is extended dry time. This is mainly due to not being able to extract a majority of the solution because their current tools flex too much or they don’t have enough strength to push as hard as they need to. The Big Mouth handles and 3/8″ Blades are the solution to that problem by taking more of the force required to adequately finish the job off of the installer and onto the tool.
    Add to cart
  • Wagner Furno 300 Heat Gun

    Wagner Furno 300 Heat Gun

    $25.00
    The FURNO 300 heat gun features dual temperature settings to help tackle countless household projects including removing paint and flooring, bending PVC, shrink wrapping, thawing frozen pipes and 101 more uses! The heat gun outputs 750°F on low and 1100°F on high to adjust to your specific heating needs. To reduce fatigue and allow extended comfort, the heat gun features an ergonomic design that fits comfortably in your hand. You can also use the integrated stand for safe, hands-free operation when applying heat to a project. When your project is complete, simply hang the heat gun from the built-in loop on the handle.
    Add to cart
  • Even Spray Flat Nozzle 8003EVS

    Even Spray Flat Nozzle 8003EVS

    $9.00
    This nozzle is designed for automotive and light residential use.
    Add to cart
  • 5″ Hybrid Squeegee

    5″ Hybrid Squeegee

    $15.00     Add to cart
  • Dual Post Kit

    Dual Post Kit

    $19.00     Select options This product has multiple variants. The options may be chosen on the product page
  • Slim Foot

    Slim Foot

    $33.81
    Modeled after the Big Foot Squeegee, the slim foot has a slender design than can reach into tighter openings. This no rib squeegee helps reach behind brake lights and has a vinyl grip for secure handling.
    Add to cart
  • Replacement Unger Squeegee Blade

    Replacement Unger Squeegee Blade

    $12.50
    Replacement blades for Unger squeegee channel, used for window cleaning, not installation.
    Add to cart
  • Fusion Red Turbo Pro 3 1/2″

    Fusion Red Turbo Pro 3 1/2″

    $7.15
    From APlusOne the FUSION TURBO PRO LINE available in 3”, 5” & 8” versions that are pre-molded to size with optional 3/4” (white) or 1 ½” (gray) diameter handles. The Turbo Pro, an injected molded tool infused with three slip agents that help the tool slide across surfaces easier. The main slip agent is the “migratory” agent that positions its self at the surface of the tool to lubricate the working part. The handles are also unique to the industry due to being specifically engineered with tighter tolerances and wider prongs that create a tighter fit on the Pro Turbo body which ensures the handle doesn’t slip off during use. The Red Turbo (95 durometer)super hard, comparable to the current industry red turbo. Commonly used on thick vinyl applications and window films.
    Add to cart
  • Gray Lidco Squeegee

    Gray Lidco Squeegee

    $2.85
    The 4" Lidco Gray Bondo can be used as an installation squeegee or wrap it in a soft towel to bump edges dry. Useful for either window film or paint protection film. Slightly harder than the white and the orange bondos.  Made in the USA.
    Add to cart
  • White Quick Foot

    White Quick Foot

    $4.60
    A stiff squeegee with a handle for jobs that require medium reach.  Slim and trim with an unwrapped handle.
    Add to cart
  • Blue Quick Foot

    Blue Quick Foot

    $4.60
    A stiff squeegee with a handle for jobs that require medium reach.  Slim and trim with an unwrapped handle.
    Add to cart
  • 5″ Fusion Grip Handle-Short Handle

    5″ Fusion Grip Handle-Short Handle

    $25.79
    Designed to optimize your leverage in removing mounting solution. Holds any of the 5″ squeegee blades. Great for high performance automotive films and smaller residential windows.
    Add to cart

Showing 31–60 of 173 resultsSorted by latest