Shop

  • Ball Lock Quick Disconnect

    Ball Lock Quick Disconnect

    $7.20
    Ball Lock Disconnect, threaded
    Add to cart
  • Nozzle Strainer/Filter

    Nozzle Strainer/Filter

    $2.00
    Nozzle strainer/filter. Fits behind many flat spray and adjustable nozzles, in the trigger body. Available in 200 mesh.
    Add to cart
  • Tank Fill Valve

    Tank Fill Valve

    $1.80

    Heavy-duty solid brass fill valve for your Tint Hozilla keg sprayer.

    Built for reliability—no chrome to flake, and fits any 5/8″ hole.

    Add to cart
  • 5 Gallon Pressure Keg Setup

    5 Gallon Pressure Keg Setup

    $335.00
    This is our 5-gallon pressurized keg-style sprayer system, built with a new 5-gallon keg. Under normal pressure conditions (70–95 psi), each keg provides an approximate working capacity of 3–4 gallons. It comes standard with 25 feet of 1/4" FlexZilla® hose, two quick disconnects, a brass trigger, nozzle filter, and two 80° fan-spray water-saving nozzles—professionally assembled for ready use. The hose assembly, along with all seals and replaceable tank parts, is backed by a Limited Lifetime Warranty.
    Add to cart
  • Hose Assembly for Kegs (brass trigger)

    Hose Assembly for Kegs (brass trigger)

    $144.00
    Direct fit 1/4" hose assembly for your Keg style sprayer. 25 feet. Available with Green Flexzilla, or ultra-flexible Kuri Tec Tundra in Red, Yellow, or Blue. Complete with Brass Trigger and swivel, TeeJet 8002 EVS auto nozzle, filter, tank quick disconnect, hose strap, and our unique crimped connections. Covered by our Limited Lifetime Warranty.
    Select options This product has multiple variants. The options may be chosen on the product page
  • Adjustable Nozzle

    Adjustable Nozzle

    $11.00
    TeeJet® Adjustable Nozzle
    Add to cart
  • Hose Storage Strap

    Hose Storage Strap

    $9.00
    Heavy Duty hose storage strap with round caribiner
    Add to cart
  • Olfa SS 50 pack 9mm blades (blue label version)

    Olfa SS 50 pack 9mm blades (blue label version)

    $22.68
    This is the original version of Olfas 9mm snap blade. Much longer lasting blade than the green label. 50 pack
    Add to cart
  • Post Cap

    Post Cap

    $6.00
    Post outlet cap. Effectively closes off the outlet where the post is installed, replacing the post itself.
    Add to cart
  • Even Flat Spray Nozzle 8002EVS

    Even Flat Spray Nozzle 8002EVS

    $9.00
    Auto/Residential Flat Spray Nozzle  
    Add to cart
  • Pink Chizzler

    Pink Chizzler

    $0.85
    Ideal for removing decals, film or adhesive from sensitive surfaces. Use for pressing down small film creases or air bubbles.
    Add to cart
  • Even Flat Spray Nozzle 8004EVS

    Even Flat Spray Nozzle 8004EVS

    $9.00
    This nozzle is better suited for large flat glass projects. It can still be used in some capacity in the auto field, with caution!  
    Add to cart
  • Red Gator Blade

    Red Gator Blade

    $1.60
    ProToolsNow Red Gator Blade  features arched blades on opposite ends. This blade design allows more scraping pressure for around rear defrosters and for adhesive removal on surfaces where metallic razor blades would scratch surfaces; such as stainless steel and painted surfaces. Except for the color, the A221R (Red) is identical to the A221 (Yellow). The ProToolsNow Red Gator Blade contours to the shape of auto glass so that it efficiently removes debris & old adhesive. It also aides in pushing down fingers and removing creases. Because Gator Blades are much less likely to cut expensive upholstery or scratch the soft surface of auto glass, they are a fantastic replacement for the hazardous metallic razor blades used by Tinters and Detailers. Try them out anywhere you would normally use a Chizler or a Plastic Razor Blade from scraping glue, installing or tucking film and even ice removal or cleaning your Teflon® pans.
    Add to cart
  • Brass Adjustable Nozzle

    Brass Adjustable Nozzle

    $17.99
    Add to cart
  • EVS Auto/medium flow Nozzle Set

    EVS Auto/medium flow Nozzle Set

    $20.00
    Flat Spray Nozzle Set (even, flat spray, TeeJet)
    Add to cart
  • Tint Hozilla Junior

    Tint Hozilla Junior

    $318.00
    This is our 3 gallon, pressurized keg style sprayer system. It is a new 3 gallon keg. Comes standard with 25 feet of 1/4" FlexZilla hose, two quick disconnects, brass trigger, nozzle filter, and two 80° fan spray water saving nozzles. All fittings are crimped, where applicable. The Hose Assembly, as well as all seals and replaceable tank parts are covered by our Limited Lifetime Warranty.
    Add to cart
  • Nozzle Nut

    Nozzle Nut

    $1.00
    Nozzle Nut for TeeJet type trigger bodies  
    Add to cart
  • Film slitter

    Film slitter

    $10.00

    Film slitter 3 pack

    Handy for most films, including wrapping paper!
    Add to cart
  • Brass Trigger Assembly

    Brass Trigger Assembly

    $78.00
    This is the same exact assembly that is used on all of our complete setups. Comes complete with filter/strainer, precision even flat spray nozzle, and a swivel hose attachment. Available for either 1/4 or 3/8 hose.
    Select options This product has multiple variants. The options may be chosen on the product page
  • Pro A-1 Red Dot

    Pro A-1 Red Dot

    $7.75
    Featuring a slim, stainless steel body with a locking micro-adjusting slide, this knife is the standard by which all others are judged. The uniform end allows this versatile knife to be used easily by both left handed and right handed installers. Finally, this knife comes with an integrated blade snap-off tool to make the next sharp edge just a snap away!
    Add to cart
  • Ball Lock Post Set (Liquid)

    Ball Lock Post Set (Liquid)

    $8.50
    This kit includes One New ball lock keg post, a poppet, and includes new orings for the pickup tube/diptube, and the Quick Disconnect. Can be used on any keg with 19/32-18 threads.
    Add to cart
  • ATR Gallon

    ATR Gallon

    $35.00
    • Film adhesive Remover
    • Does not contain alcohol, ammonia, or harsh abrasives
    • Concentrated
    • Made in the USA
    Add to cart
  • Trigger Extension

    Trigger Extension

    Price range: $16.00 through $22.00
    This extension will fit our brass trigger body and is used for mostly PPF and commercial applications. *Available in 8" & 18", both curved and straight
    Select options This product has multiple variants. The options may be chosen on the product page
  • EZ Reach Platinum

    EZ Reach Platinum

    $4.75
    Offers a hard card texture with internal lubrication technology to help prevent scratching, making it essential for installing film in tough corners.
    Add to cart
  • O-ring Set

    O-ring Set

    $8.00
    Complete O-ring set for Cornelius syle ball lock kegs.
    • 1 lid O-ring,
    • 2 post O-rings,
    • 2 gas/liquid tube orings,
    • 2 poppet orings, and a release valve oring.
    These orings are intended for use in pressurized spraying systems, and are not equivalent to those found on homebrew sites.
    Add to cart
  • Black Hardcard

    Black Hardcard

    $2.10
    Teflon hard card squeegees have been an industry favorite for many years because they offer the biggest variety of flex ratings and colors.
    Add to cart
  • Hozilla DIY Keg Kit

    Hozilla DIY Keg Kit

    $158.00
    Build your sprayer with this complete kit — the same simplicity and integrity as our original Tint Hozilla setups. Includes a 25' hose with brass trigger, tank seal kit, fill valve, ball lock connector, and storage strap. Drill a 5/8" (16mm) hole in your lid and you’re ready to go. ⚠️ Use caution when drilling large-diameter holes.
    Add to cart
  • Even Flat Spray Nozzle 8005EVS

    Even Flat Spray Nozzle 8005EVS

    $9.00
    This nozzle produces a very heavy flow. It should only be used on flat glass by someone who is familiar with waterflow and high capacity systems.
    Add to cart
  • Keg Lid (Fits most keg sizes)

    Keg Lid (Fits most keg sizes)

    $23.00
    Add to cart
  • Gasket Push Stick (White)

    Gasket Push Stick (White)

    $1.35
    Gasket Push Sticks are used to push down the gasket lips on roll down windows allowing the window film to be installed below the gasket line.
    Add to cart